In a high-pressure or steam jet unit:
Pre-dilute 1:1 to 1:10 with water and fill this mixture as a parent solution in the alkaline tank. The product concentration in the cleaning jet should be 0.3% to 5%.
For the spray and wipe process: Dilute 1:10 to 1:40 with water (always add the product to water when diluting) and wet the surfaces to be cleaned from bottom to top. Allow to react for a short time and rinse off with water.
High-pressure and steam jet units need to be after-rinsed with clear water for at least 2 minutes after completion of the cleaning cycle.
Because of the great variety of applications, methods and material properties, this information sheet can only be a non-binding advice based on our experiences. No liability for any achievable results in an application can be derived from this. For special purposes, a preliminary test for material compatibility has always to be carried out. We can not be held liable for any improper use and damages resulting from this. Official, in particular local, regulations must be observed. Our products are subject to technical changes.