The surfaces must be load-bearing, clean and free of dust, oil and grease. The optimal temperature for the product and the substrate is between +5 °C and +25 °C. It is advisable to carry out a bond and compatibility test on the relevant substrates. Wear safety goggles and protective gloves. Remove the threaded cap and cut the nozzle to the desired rope width. Break off the locking piece (at the bottom of the nozzle) and turn the nozzle by 90 degrees counter-clockwise. Apply silicone by pressing the lever. Cured silicone can be removed mechanically.
High Performance Engine sealing compound schwarz
One-component, heat-resistant silicone sealant on polysiloxane basis, especially suitable for temperature-stressed areas.
- Is suitable for seals of any kind within areas that are exposed to high thermal loads. This includes engine housings, gear cases, oil sumps, valve covers, water pumps, spur gear covers, differential seals, battery boxes, headlamps, rear and brake lights,