Description
Wet the surfaces to be cleaned sufficiently with the product using a scrubber, mist-free spray gun, etc. Use undiluted or pre-dilute 1:3 to 1:10 with water in a plastic container before use depending on the extent of soiling. After a short reaction time (depends on the object and dirt type), wash off sufficiently with a strong water jet (high-pressure unit if possible). An after-treatment using a brush is recommended in case of heavy soiling.
Do not use on glass! Use in well ventilated areas or outdoors only. When spraying the product, wear a face mask and work with the wind. Do not breathe the atomized spray.
Because of the great variety of applications, methods and material properties, this information sheet can only be a non-binding advice based on our experiences. No liability for any achievable results in an application can be derived from this. For special purposes, a preliminary test for material compatibility has always to be carried out. We can not be held liable for any improper use and damages resulting from this. Official, in particular local, regulations must be observed. Our products are subject to technical changes.